Non Standard Flat Washers M 2- M130 SS304 / SS316 For Machinery ISO 9001 Approved

Thông tin chi tiết sản phẩm:

Nguồn gốc:	CHINA
Hàng hiệu:	HNF
Chứng nhận:	ISO9001
Số mô hình:	NON- STANDARD

Thanh toán:

Số lượng đặt hàng tối thiểu:	10000PCS
Giá bán:	Negotiation
chi tiết đóng gói:	bulk +pallet
Thời gian giao hàng:	5 works day
Điều khoản thanh toán:	Western Union, L/C,Paypal
Khả năng cung cấp:	500TON/MONTH

Tiếp xúc

Chi tiết sản phẩm

Material:	Stainless Steel	size:	M6-M130
Class/Grade:	304/316	International Standard:	NON- STANDARD
Certificate:	ISO9001	Connection:	Contacting
Type:	plain washer	Used:	Machinery, Chemical Industry
Điểm nổi bật:	Rubber Flat Washer , Galvanized Flat Washers

Non-standard Stainless Steel M 2- M130 SS 304 ,SS 316 Flat Washer

1.Product Description

There are severl kinds of washers,and different type has different use.High-strength steel washers, spherical washers, conical washers, Square taper washers for I-beam, channel steel square taper washers, standard spring washers, spring washer light, heavy spring washer, internal tooth lock washers, Serrated lock washers, lock washers external teeth, serrated lock washers, lock washers monaural, binaural washers, external tab washers, round nut washers. Flat washers generally used in the connecting member is a soft texture, a hard brittle texture, and its main role is to increase the contact area, spread the pressure, prevent the soft texture of crushed. The basic action of the spring washer spring, then tighten the nut after nut a force, increasing the friction between the nut and bolt! Material 65Mn (spring steel), heat treatment, hardness HRC44 ~ 51HRC, by surface oxidation. Washer (spring) washers, retainer is resilient pad or card

In short, bolts, washers, although very small, inconspicuous basic mechanical parts, in fact, inside the mechanical problems, material problems, and even a lot of mechanical principle problem at all, critical time can not be a little sloppy.
Such fastening member such as a bridge to see the site, designed to tighten these places a number of factors in addition to the above, there is more attention, including the installation of fastening installation technology, maintenance, preservation, and other aspects to consider replacing damaged.

2.Specification

Item	plain washers
Standard:	Non- standard
Material	Stainless Steel: SS201 SS304/SS304L SS316/SS316L SS904

Production Process	M2-M130
Stock Products	Stainless steel: All DIN Standard stainless steel products

d	n	h	H
2 (2.1-2.4)	0.9±0.1	0.5±0.1	1.0-1.2
2.2 (2.3-2.6)	1±0.1	0.6±0.1	1.2-1.4
2.5 (2.6-2.9)	1±0.1	0.6±0.1	1.2-1.4
3 (3.1-3.4)	1.3±0.1	0.8±0.1	1.6-1.9
3.5 (3.6-3.9)	1.3±0.1	0.8±0.1	1.6-1.9
4 (4.1-4.4)	1.5±0.1	0.9±0.1	1.8-2.1
5 (5.1-5.4)	1.8±0.1	1.2±0.1	2.4-2.8
6 (6.1-6.5)	2.5±0.1	1.6±0.1	3.2-3.8
7 (7.1-7.5)	2.5±0.1	1.6±0.1	3.2-3.8

3.Application

Flat pad acts 2: one is the screw is too long: There is a screw or deduction is half plus flat pad cap on it with full, the screw the other is where the hole is too big plus flat pad will not take down the drain

4.Advantage

1. Under Under normal circumstances, the load is relatively small, and not subjected to vibration load situation can only pad.
2. Under the load is relatively large, and withstand vibration load case, you must use flat washers, spring washers combinations.
3. The spring washer is not substantially alone, they are used in combination.

5.more pictures

Non Standard Flat Washers M 2- M130 SS304 / SS316 For Machinery ISO 9001 Approved 0